Monarch Instrument 9400 Series - Manual (Page 37)

Entering Supply Information
You can enter supply values when you define the format. Or
you can press
C , then E , to let the operator enter a
value in Data Entry. (To let the operator enter a value for Print
Quality, just press
E
at the prompt without pressing
C
first).
The first steps in Format Entry include naming a format and
entering information about the supply you’re using.
1. Begin Format Entry from the main menus. Press
U
or
D
to display Format Entry and press E . You’ll see
Enter password:______
2. Enter your 1-8 character security password and press
E
. See "Changing Passwords" if you need to reset
the password.
For example, type M9400 and press E . You’ll see
Format Entry Mode
Enter format name
3. Type a 1-8 character format name and press E . You’ll
see the message New Format (NAME)
For example, type SAMPLE and press
E
. You’ll see
Stock dimensions (inches)
Width = 0.00 Length = 0.00
E
n
te
ring
a
For
m
a
t
3. Entering a Format
3-5