Motorola I296 H88XAH6JR2AN - Manual (Page 57)

53 LINCaround
after your phone emits the LINCaround
tone.
Note: The LINCaround tone consists of 4
rapid beeps.
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
receiving code calls
When you receive a code call, Receive appears
on the display. When you hear the
LINCaround tone, you have six seconds to
reply before the call times out.
To reply to the call, press the PTT button.
Note: You can terminate an incoming
LINCaround call at any time by pressing @.
receiving all LINCaround calls
If you set the code to Receive All, your phone
can receive LINCaround transmissions from
any phone that is set to the same channel,
regardless of the code (1-15). When you
receive transmissions with the code set to
Receive All, the code that the transmission was
received on will replace Receive All on the
display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1 From the LINCaround home screen,
press
K under Edit.
2 Scroll to Code.
3 Press K under Edit.
4 Select Receive All.