Muratec MFX-2590 - Manual (Page 40)

1
2
Operating the
V
arious Functions
Transmitting Documents 2-13
„ Specifying Advanced Communication Settings
You can specify a transmission time and add body text for an e-mail.
Open the transmission screen and specify the destinations.
1
See “ Performing Transmission ” step 1 to 5 how to operate. (See page 2-9.)
Click the [+] to the left of “Advanced Settings”.
2
Specify the required settings.
3
Setting Description
TTI Transmit Set whether to print the TTI on the document and which of the three
TTIs that can be registered to print.
Delayed
Transmission Set this to specify the time to transmit the document. Transmissions can
be reserved up to one month in advance.
Transmission
Report If you set the transmission report, you can print the transmission results
or send them to an e-mail address you enter.
F-Code
Transmission To perform F-Code communication, set a sub address and passcode.
For details on F-Code communication, refer to Chapter 4, “F-Code
Communications” in the Scanner and Fax Guide.
Mail Text Setting When transmitting to an e-mail destination, you can enter the text and subject
of the e-mail to send. If you do not enter a text and subject, they are entered
automatically according to the settings in “Insert Subject / Text (I-Fax or
E-mail)” in “Optional E-mail Settings”.
(See page 3-67.)