Muratec MFX-2590 - Manual (Page 235)

4-4 Managing Events (InfoMonitor)
“User Monitor Settings” Screen „
On the “User Monitor Settings” screen, you can check the monitoring status of
InfoMonitor, and specify the various settings.
Item Description
User List Displays a list of the machines for monitoring.
The following items are displayed.
Machine Name: Displays the name of the machine for monitoring.
Status: Displays the current monitoring status (“Monitoring”,
“Not monitoring”, or “Connection error”).“Connection
error” is displayed if the machine cannot be connected
to.
User Name: Displays the name of the user to notify of events.
Notification Settings: Displays whether to notify the user when an event
occurs.“Yes” is displayed when notification is set, and
“No” is displayed when notification is not set.
Change Status Switches the monitoring status of the device. (See page 4-15.)
Notification items Selects the events to notify the user of. (See page 4-14.)
Add Registers/adds machines to monitor. (See page 4-5.)
Remove Removes a registered machine from the list of monitored devices. (See
page 4-16.)
Detail Settings Specifies monitoring settings (Recordable Number, Monitoring Interval,
and Event notification using popup messages).
(See page 4-10.)