Minuteman UPS SNMP-32 Series - Manual (Page 32)

32
7-3. Current Probe Sensor (CPS)
This section will guide you through the SNMP-32 card’s CPS Web pages. See the CPS User’s Manual for installation
instruction.
1. CPS Status (Fig. 48)
This screen shows the electrical current detected by CPS and indicates if the current is out of the preset range.
Fig. 48-CPS Status Screen
2. CPS Configuration (Fig. 49)
Name
The user can rename the CPS.
Threshold 1
The user can set the out-of-tolerance value for the first phase.
Threshold 2
The user can set the out-of-tolerance value for the second phase.
Fig. 49-CPS Configuration Screen