Minuteman UPS SNMP-32 Series - Manual (Page 13)

13
3. Trap Notification
A. Receiver IP Address:
This section is to set the receivers IP address for receiving traps sent by SNMP-32 card. It is valid for up to
eight IP Addresses.
B. Community:
This section is to set a Community name for NMS. The community name has to be the same as the setting
in NMS.
C. Severity:
This section is to set the Trap receiver levels. There are three levels for the Trap receiver:
z
Information: To receive all traps.
z
Warning: To receive only “warning” and “severe” traps.
z
Severe: To receive only “severe” traps. (Please refer to NMS User’s Manual for Trap levels).
D. Acceptance:
This section is for authorizing the receiver to receive a trap or not.
E. Description:
This section is for an administrator to make notes.
F. Events (Fig. 15):
This section is to select events for SNMP-32 card to send traps. Clicking on Select will open a Select Events
List. Event Traps may be selected from this list.
Fig. 14-SNMP Screen
Fig. 15-Event Screen