Minuteman UPS SNMP-32 Series - Manual (Page 10)

10
4. Web Management Interface
Once the SNMP-32 card installation and set-up procedure is complete, you are now able to monitor and control the
SNMP-32 card via a Web Browser.
1. Open a Web Brower (Netscape, Internet Explore, Opera, Mozilla).
2. Enter the SNMP-32 card’s IP Address.
3. Enter the User Name and the Password (Not required). If a User Name or a Password was not entered in the
Set-Up Procedure, then click OK (Fig. 10).
NOTE: There is no default User Name or Password.
Fig. 10-SNMP-32 card: Login Screen
4-1. Main Menu
On the left hand-side of the Main Menu, there are four categories (Fig. 11):
1. Information:
Provides the information about the connected Device.
2. Configuration:
Configure the network and devices setting.
3. Log Information:
Record the events and data that is generated by device.
4. Device selection:
Select the device to monitor and control, including the UPS, RPM, CPS, ENV
and ATS.
Fig. 11-Main Menu Screen