Minuteman UPS SNMP-32 Series - Manual (Page 29)

29
7-2. Remote Power Manager (RPM)
This section will guide you through the SNMP-32 card’s RPM Web pages. See the RPM User’s Manual for installation
instruction.
1. RPM Status (Fig. 44)
Select RPM
Select which RPM to view and control (RPM01-RPM16).
Outlet A-H
Name the outlet. The user can rename each individual outlet (see RPM Setting screen).
Outlet Control
Non-Internet: The outlet can only be controlled locally by the front panel control buttons. The outlets cannot be
controlled via the Web page.
Instant Shutdown: The outlet can only be controlled via the Web page. The outlet can be turned on/off instantly
by clicking on the outlet icon.
Safe Shutdown: The outlet can only be controlled via the Web page. The outlet will be turned off after XX
number of seconds by clicking on the outlet icon (see RPM Setting screen).
Safe Reboot: The outlet can only be controlled via the Web page. The outlet will turned on (reboot) after XX
number of seconds (see RPM Setting screen).
On/Off
This is the current state of the outlet, on/off.
Outlet Icon
Clicking on the Outlet Icon will change the state of the outlet (on/off). If the Outlet Icon is yellow, the outlet is on.
If the Outlet Icon is white, the outlet is off.
All On Button
Clicking on the All On button will turn all of the outlets on, when the outlets are setup for Internet control.
All Off Button
Clicking on the All Off button will turn all of the outlets off, when the outlets are setup for Internet control.
Fig. 44-RPM Status Screen