Motorola SBG940 - Manual (Page 88)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 80
Wireless > STATUS Page
You can use this display-only page to:
•
View the wireless interface status
•
Help perform Troubleshooting for wireless network problems
Wireless > STATUS Page Fields
Regulatory Domain Indicates the country the SBG940 is manufactured for. The list of channels depends on the
country’s standards for operation of wireless devi
ces. Depending on the domain set at the factory,
USA FCC, Europe, Spain, France, Japan, or some other country name is displayed.
ESSID Displays the ESSID set on the Wireless > NETWORK Page . For more information, see
“ Configuring the Wireless Network Name on the SBG940 ”. Never provide the ESSID to anyone
who is not authorized to use your WLAN.
Channel Displays the radio channel for the access point. If you encounter interference, you can set a
different channel on the
Wireless > NETWORK Page .
RTS Threshold Displays the Request to Send Threshold set on the Wireless > NETWORK Page .
Frag Threshold Displays the Fragmentation Threshold set on the Wireless > NETWORK Page .
MAC Address Displays the SBG940 MAC address.
Security Mode Displays the enabled wireless encryption type. For more information, see “ Configuring WPA on
the SBG940 ” or “ Configuring WEP on the SBG940 ”.
MAC Access Control Displays the MAC Access Control setting (see “ Configuring a MAC Access Control List on the
SBG940 ”):
• Allow Listed — Only clients in the MAC access control list can access the WLAN.
• Allow Any Station Access — Any wireless client can access the WLAN.
MAC Access Control List Displays the MAC addresses of wireless clients having access (see “ Configuring a MAC Access
Control List on the SBG940 ”).