Running the motorola usb driver removalutility, Running the motorola usb driver removal utility, En perform – Motorola SBG940 User Manual
Page 115
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
107
Running the Motorola USB Driver Removal Utility
Before running the Motorola USB Driver Removal Utility, you must run the Windows Device Manager by
performing one of:
•
“Removing the USB Driver from Windows 98 Second Edition or Windows Me”
•
“Removing the USB Driver from Windows 2000”
•
“Removing the USB Driver from Windows XP”
To run the Motorola USB Driver Removal Utility:
1
Insert the SBG940 Installation CD-ROM in the CD-ROM drive. After a short time, a window with language
choices is displayed.
2
Press the Esc key on the keyboard to exit the start-up screens.
3
To start Windows Explorer, click Start and select Run. On the Run window, type explorer and click OK.
4
Double-click My Computer.
5
Double-click the Motorola SBG icon (D: in the image).
6
Double-click remove or remove.exe to run the Remove utility from the SBG940 Installation CD-ROM. The
Motorola USB Driver Removal window is displayed. Be sure the USB cable is disconnected.
Your Windows Explorer may appear different than in the image on this page. There are
variations between Windows versions and you can configure Windows Explorer as you like.