Wall mounting, Caution – Motorola SBG940 User Manual
Page 30
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
22
Wall Mounting
If you mount the unit on the wall, you must:
•
Locate the unit as specified by the local or national codes governing residential or business cable TV and
communications services.
•
Follow all local standards for installing a network interface unit/network interface device (NIU/NID).
If possible, mount the unit to concrete, masonry, a wooden stud, or other very solid wall material. Use anchors if
necessary; for example, if you must mount the unit on drywall.
To mount your SBG940 on the wall:
1
Go to
and click the Print icon or choose Print from the File menu to display the Print dialog box.
(The following image is from Adobe Acrobat Reader
®
version 4.0 running on Windows 2000; there may be
slight differences in your version.)
Be sure you print the template at 100% scale. Be sure Fit to page is not selected.
To print the template only, select Current page as the Print Range.
Click the OK button to print the template.
2
Measure the printed template with a ruler to ensure that it is the correct size.
3
Use a center punch to mark the center of the holes.
4
On the wall, locate the marks for the mounting holes.
5
Drill the holes to a depth of at least 1
1
/
2
inches (3.8 cm).
Caution!
Before drilling holes, check the structure for potential damage to water, gas, or electric lines.
Be sure this is
not selected.
Select this to print
page 24 only.