Motorola SBG940 - Manual (Page 85)

Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide 77
Configuring the Wireless Clients
For each wireless client computer (station), install the wireless adapter — such as a Motorola WN825G,
WPCI810G , or WU830G — following the instructions supplied with the adapter. Be sure to:
1 Insert the CD-ROM for the adapter in the CD-ROM drive on the client.
2 Install the device software from the CD.
3 Insert the adapter in the PCMCIA or PCI slot or connect it to the USB port.
Configure the adapter to obtain an IP address automatically. The Motorola wireless adapters are supplied with a
client configuration program called Wireless Client Manager, which is installed in the Windows Startup group.
On a PC with Wireless Client Manager installed, the icon is displayed on the Windows task bar. Double-click
the icon to launch the utility.
You may need to do the following to use a wireless client computer to surf the Internet:
If You Performed On Each Client, You Need to Perform
Configuring WPA on the SBG940 Configuring a Wireless Client for WPA
Configuring WEP on the SBG940 Configuring a Wireless Client for WEP
Configuring the Wireless Network Name on the SBG940 Configuring a Wireless Client with the Network Name
(ESSID)
Configuring a MAC Access Control List on the SBG940 No configuration on client required
Step 1
Step 1
Step 2
Step 2
Step 3
Step 3