Configuring the wireless network name, On the sbg940, Configuring the wireless network name on the – Motorola SBG940 User Manual
Page 82: Sbg940
Configuration: Basic Gateway TCP/IP Wireless USB
SBG940 User Guide
74
Configuring the Wireless Network Name on the SBG940
If you disable ESSID broadcasting on the SBG940, the SBG940 does not transmit the network name (
This provides additional protection because:
•
Only wireless clients configured with your network name can communicate with the SBG940
•
It is more difficult for unauthorized individuals who scan for unsecured WLANs to access your WLAN
Closed network operation is an enhancement of the IEEE 802.11b and IEEE 802.11g standards.
If you select Disable ESSID Broadcast, you must perform
Configuring a Wireless Client with the Network Name
(stations). Never provide your ESSID to anyone who is not authorized to use
your WLAN.
To configure the ESSID on the SBG940:
1
Start the SBG940 Setup Program as described in “
Starting the SBG940 Setup Program
2
On the left panel, click Wireless.
3
Click the NETWORK tab to display:
4
In the ESSID field, type a unique name. It can be any alphanumeric, case-sensitive string up to
32 characters. The default is “Motorola.” Do not use the default ESSID.
5
Click Save Changes to save your changes.
6