Minolta Magicolor 2200 - Manual (Page 134)

Status, Error, and Service Messages 126
Service Messages
This service message... Means...
SERVICE CALL 04 MAIN UNIT An error has been detected with the
item indicated in the service mes-
sage. Correction of these errors is
performed by a MINOLTA-QMS-
authorized service provider only.
Contact your local vendor.
A service message sometimes
occurs as a result of an unusual com-
bination of events, not because of an
actual problem. When the printer
stops and a service message dis-
plays in the message window, turn
the printer off and then back on. This
often clears the service message
indicator, and printer operation
resumes. Always try this before
making a service call.
Service calls should be placed to the
vendor from whom you purchased
the printer. If you cannot get service
from your vendor, see the
Service &
Support Guide for additional contact
information.
SERVICE CALL 05 FLASH ROM
SERVICE CALL 08 MAIN MOTOR
SERVICE CALL 09 FUSING MOTOR
SERVICE CALL 0B XFER FAN BELT
SERVICE CALL 0C PWR SUPPLY FAN
SERVICE CALL 0D ENGINE FAN
SERVICE CALL OE SUCTION FAN
SERVICE CALL OF FUSING UNIT FAN
SERVICE CALL 10 POLYGON MOTOR
SERVICE CALL 12 LASER MALFUNCTION
SERVICE CALL 14 XFER ROLLER
SERVICE CALL 15 XFER BELT CLN
SERVICE CALL 16 XFER BELT ROTATE
SERVICE CALL 17 TONER RACK
SERVICE CALL 18 FUSER UPP WARMUP
SERVICE CALL 19 FUSER UPP LOWTMP
SERVICE CALL 1A FUSER UPP HIGTMP
SERVICE CALL 1B FUSER UPP THERM