Minolta Magicolor 2200 - Manual (Page 130)

Status, Error, and Service Messages 122
Status and Error Messages
Status messages are not displayed while the printer is off line.
This message... means... Do this...
< X> COVER OPEN The < X> (specified cover) is
open and must be closed.
Close the cover.
< X> LIFE LOW The < X > (specified item) is near
end of life, such as the fuser oil
roller. If you have a new fuser oil
roller on hand, you may want to
install it now. If you don’t, order
one now. A limited number of
copies (about 100) will still print.
However, when the oil runs out,
the printer stops and the
FUSER
OIL EMPTY message appears.
Replace the specified
item.
< x> MISSING The (specified item) is
missing, such as the OPC drum
or toner.
Install a new item.
< X> TONER EMPTY The (color) toner cartridge
is empty.
Replace the toner
cartridge.
< X> TONER LOW The < X> (color) toner cartridge
is low. There is still enough for
approximately 100 letter/A4
pages (at 5% coverage) before
the printer stops.
Redistribute the toner in
the cartridge, or replace
the cartridge.
ADJUST < INPUT> BIN The < INPUT> (specified tray) is
not inserted correctly.
Adjust the tray.
CALIBRATING After 100 1-sided pages of a
continuous print run, the magi-
color 2200 DeskLaser automati-
cally pauses to do an
Auto-Image Density Control
(AIDC) cycle. Wait. No action needed.
This process is pro-
vided to make sure reli-
able printer operation
with optimum output
quality.