Multitech MT1432BA - Manual (Page 140)

140
MultiModemBA User Guide
Appendix E - DIP-Switch Summary
Asynchronous Mode
DIP-Switch Condition Effect
#1 UP* DTR dependent on interface
Down DTR forced On at all times
#2 UP* Hardware Flow Control
Down Xon/Xoff Flow Control
#3 2834 Series:
UP -15 dB Transmission (leased line)
Down* -9 dB Transmission (leased line)
#3 1432 and 932 Series:
UP -10 dB Transmission (leased line)
Down* 0 dB Transmission (leased line)
#4 UP* UUCP Spoofing Off
Down UUCP Spoofing On
#5 UP* Automatic Answer On
Down Automatic Answer Off
#6 UP* Max throughput On
Down Max throughput Off
#7 UP RTS dependent on Interface
Down* RTS forced On at all times
#8 UP Disable Command Mode
Down* Enable Command Mode
#9 UP Local Digital Loopback On
Down* Remote Digital Loopback On
#10 UP* Dial-Up Operation
Down Leased Line Operation
#11 UP "AT" Responses
Down* Multi-Tech Responses
#12 UP Synchronous Mode On
Down* Asynchronous Mode On
*Factory Default Setting