3 speaker volume control, 4 recording option configurations, Speaker volume control – Multitech MT1432BA User Manual
Page 115: Recording option configurations
115
Chapter 9 - DIP-Switch Settings
9.3
Speaker Volume Control
You can adjust the volume of the modem’s phone-line monitor speaker with a volume control knob,
located on the back of the modem next to the RS-232C connector (see Figure 9-1 for location). Turn
the knob clockwise to increase the modem's volume and counterclockwise to decrease speaker
volume. See Speaker Control Command (M) in
.
9.4
Recording Option Configurations
This section lets you record any changes you may have made to the DIP-Switch settings. Circle the
appropriate setting and record the effect for future reference.
DIP-Switches
Switch
Function
Position
Effect
#1
Force DTR/DTR from Interface*
UP*
DOWN
#2
Flow Control &E4*/&E5
UP*
(Async/Dial-Up/Leased Line)
DOWN
#2
SDLC*/BSC (Sync)
UP*
DOWN
#3
Result Codes Enable*/Disable
UP
(Async/Dial-up)
DOWN*
#3
DbM Transmit
(-9db/0dB)
*/
(-15db/-10dB)
UP
(Async/Sync/Lease-Line)
DOWN*
#4
UUCP Enable/Disable*
UP*
(Async/Dial-Up/Leased Line)
DOWN
#4
AS/400 Enable/Disable*
UP*
(Sync/Dial-Up/Leased line)
DOWN
#5
Auto-Answer Enable*/Disable
UP*
(Async/Sync/Dial-Up)
DOWN
#5
Answer*/Originate
DOWN
(Async/Sync/Leased Line)
UP*
#6
Max-Thru Enable*/Disable
UP*
(Async/Dial-Up/Leased)
DOWN
#6
Slave Clock Enable/Disable*
UP*
(Sync/Dial-Up/Leased)
DOWN
#7
RTS/Normal/Forced*
UP
(Sync/Async/Dial/Leased)
DOWN*
#8
Command Mode Enabled*
UP
(Sync/Async/Dial/Leased)
DOWN*
#9
Local/Remote* LoopBack
UP
(Async/Sync/Dial/Leased)
DOWN*
#10
Dial-Up*/Leased-Line
UP*
DOWN
#11
"AT"/"Multi-Tech" Result Codes*
UP
(Asynchronous)
DOWN*