Multitech MT1432BA - Manual (Page 116)

116
MultiModemBA User Guide
#11 Internal*/External Clocking UP
(Synchronous) DOWN*
#12 Sync/Async Mode* UP
DOWN*
* Factory Default Setting
DIP Switches #13-14
Note: The modem baud rate command ($MBn) overrides the setting of these speed selection
switches (DIP switches #13 and #14).
2834 Series:
SWITCH CONDITION EFFECT
#13/#14 UP/UP* 28.8 K bps Operation
#13/#14 DOWN/UP 19.2 K bps Operation
#13/#14 UP/DOWN 14.4 K bps Operation
#13/#14 DOWN/DOWN 9600 bps Operation
1432 Series:
SWITCH CONDITION EFFECT
#13/#14 UP/UP* 14.4 K bps Operation
#13/#14 DOWN/UP 9600 bps Operation
#13/#14 UP/DOWN 4800 bps Operation
#13/#14 DOWN/DOWN 2400 bps Operation
932 Series:
SWITCH CONDITION EFFECT
#13/#14 UP/UP* 9600 bps Operation
#13/#14 DOWN/UP 4800 bps Operation
#13/#14 UP/DOWN 2400 bps Operation
#13/#14 DOWN/DOWN 1200 bps Operation
DIP Switches #15-16
SWITCH CONDITION EFFECT
#15 UP* CD/DSR from Interface
#15 DOWN CD/DSR Forced On
#16 UP Not Used
#16 DOWN* Not Used
*Standard Factory Default Setting