Monarch Instrument 9403TM - Manual (Page 94)

616 A bad dot falls on a bar code and the dot cannot be
shifted. Call Customer Service to order a new
printhead or printhead kit.
618 Magnification must be 1 to 7.
M a c h i n e F a u l t s
Errors 700 to 765 happen when there is a problem with the
printer. For errors 700-704, press Enter and try to continue
printing. If the error reappears, call Technical Support.
Error Description/Action
700 An error is pending, and the printer cannot continue
with the batch.
701 Printer received a command that it cannot execute
while it is running.
702 Check your printer’s SETUP settings.
703 The printer sensed a calibration of different-sized black
marks.
704 Printer didn’t detect a sense mark within the maximum
feed length or is out of supplies. Check or load
supplies.
705 Invalid batch received.
750 Printhead is overheated, turn off the printer to let it cool.
751 Printer didn’t detect a sense mark when expected.
752 Printer detected a sense mark in the wrong place.
753 Printer detected a sense mark that is too long.
11 - 12 Troubleshooting