Monarch Instrument 9403TM - Manual (Page 91)

314 Check digit algorithm must be D (sum of digits) or P
(sum of products).
325 Duplicating direction must be 0 or 1.
327 Amount of row adjustment must be 0 to 999.
328 Duplicate count must be 0 to 999.
340 Bitmap line encoding must be H (Hex) or R (Run length).
350 Font selector must be 1 to 9999.
351 Font data length must be 68 to 16384.
352 Insufficient font memory is available for the downloaded
font.
380 Job request is outside the range 0 to 4.
400 Invalid character following {.
401 Internal software failure. Call Technical Support.
402 Field separator is not in the expected location.
403 Field separator was not found.
404 The number or string that is currently being processed
is too long.
405 Too many fields exist in the format.
C o m m u n i c a t i o n F a i l u r e s
Errors 410 to 413 are usually caused by a hardware failure, by an
incorrect SETUP option or by the host ignoring flow control
(XON/OFF, CTS/RTS or DTR). These errors occur when the
printer cannot communicate with the host. Refer to the Packet
Reference Manual or your System Administrator for more
information.
Troubleshooting 11 - 9