Monarch Instrument 9403TM - Manual (Page 93)

D a t a F o r m a t t i n g E r r o r s
Errors 571 to 618 are data formatting errors. This type of error
happens when a field prints incorrectly. Your System
Administrator can correct the format, batch, or graphic packet and
send the print job again. For errors 571 to 614, the printer will
still print, but the data may be incomplete, missing, or contain
incorrect data.
Error Description/Action
571 UPC or EAN bar code data length in the batch doesn’t
fit the format.
572 Batch data doesn’t fit the format, the field contains
blanks, or data mismatch.
573 Batch data in price field doesn’t fit the format or the
field contains blanks.
574 Batch data in check digit scheme doesn’t fit the format,
or, the field contains blanks.
575 The graphic included in your format could not be found.
600 Imaging error because the batch was refused.
601 An error occurred while the batch was imaging.
602 The batch was not found during imaging.
611 Font, bar code, or density in the batch doesn’t fit the
format.
612 Batch data is missing or doesn’t match the format.
613 Reference point off tag.
614 Portion of field off tag.
615 Bar code width is greater than 16 inches, or keywords
on PDF 417 bar code exceed 928.
Troubleshooting 11 - 11