Madrigal Imaging MP-9 - Manual (Page 51)

Audio
➤
Functions
Mute
The Mute function is used to silence audio output.
To silence the audio output, press . Press again to restore audio.
Volume
The Volume function is used to adjust the audio output level.
To adjust Volume, press then or until the desired audio level is
attained.
System Status
➤
Pages
The projector’s current operating
settings may be displayed by
pressing
while at operation
level. Each time is pressed, one
of three main status pages is dis-
played. To return to operation
level, press
.
Page 1 displays general projector
information and operating settings
which include identity, software
version, date and time, keypad
type, scan configuration, auto
power-up setting, message display
setting, switchers (numbers) con-
nected, installed options, and
mute setting. Operating settings
are explained in the following
entries in this section.
Page 2 displays current input
parameters. These parameters
(defined later in this section),
relate specifically to the currently
selected input.
EXIT
VOL
MUTE MUTE
OPERATION
3.9