Madrigal Imaging MP-9 - Manual (Page 107)

Notes: 1. Blanking can be increased with left and right blanking controls
2. Retrace fixed as Short in ranges 45–60 kHz and 100–152 kHz
despite user setting
3. Defl. retrace time must be less than the max. blanking duration
4. Horizontal blanking duration of the source must be more than
the max. blanking duration of the projector to avoid cutting off
the left or right edge of the source image.
5. Max. Blanking duration of the projector must be compatible with
all known sources (at the specific source frequency).
6. Max. Blanking duration of the projector restricted to 1.5µs for
operation in the range 120 kHz–152kHz.
High Voltage
➤
❑ 34.9 KV regulated to better than ±1%
Power
➤
Requirements
❑ 90 VAC to 264 VAC universal input
❑ Line Frequency: 50 to 60 Hz nominal
❑ Power: 650 watts maximum
❑ Power factor corrected
Inputs
➤
❑ Built-in RGBHV interface. Optional interface modules install in
interface slot
❑ Built-in RS-232 for computer control, with loop-thru for connection
of multiple projectors
❑ HDTV compatible with optional interface module
Optional Source
➤
Expansion
❑ The Signal Switcher allows use of nine additional input modules. Up
to nine switchers can be connected
❑ Maximum Number of Inputs: 78
Control Features
➤
❑ Multi-language software (user selectable)
❑ Menu driven interface with on-screen help
❑ Built-in set up tutorials
❑ Auto power up after power interruption
❑ Six built-in test patterns
❑ Internal frequency generator
❑ Programmable events and real time clock
Servicing
➤
❑ Modular design for ease of servicing
❑ Most service adjustments are made using the keypad
SPECIFICATIONS
5.3