3 features and components, 1 power switch and default settings, Turning the copier on and off – Minolta CF3102 User Manual
Page 26: To turn the copier on, To turn the copier off, Features and components, 3features and components
Features and Components
3
CF2002/CF3102
3-1
3
Features and Components
3.1
Power Switch and Default Settings
Turning the Copier On and Off
To turn the copier on
➜
Set the power switch to “I”.
When the copier is turned on, the
indicator on the [Start] key lights up in
orange. A screen indicating that the
machine is starting up appears.
After a few seconds, the message “Now
warming-up. Ready to scan.” appears
on the touch panel. When the indicator
on the [Start] key lights up in green, a
job can be queued.
To turn the copier off
1
Touch [Job Log] to check that no jobs are queued.
2
If any copies or printouts remain in the output tray, remove them.
3
Set the power switch to “O”.
The following are cleared.
●
Settings that are not programmed, such as the number of copies
●
Data scanned using the “Scan to Memory” function
●
Jobs queued to be printed
●
Jobs saved with the “Memory Recall” function
Stored zoom ratios, programmed Copy mode settings, Utility mode
settings and UserBox settings are not erased.
CF2002.book Page 1 Friday, June 13, 2003 9:29 AM