Minolta CF3102 - Manual (Page 104)

Basic Operations 6
CF2002/CF3102 6-3
9 Touch [Photo/Density].
❍ Make sure that the Photo/
Density setting “Text&Photo” is
selected.
❍ Make sure that the standard
(middle) Density setting is
selected.
❍ For details, refer to page 3-10
and the advanced version of the
User manual on the CD-ROM.
10 Touch [Auxiliary].
❍ Check that no functions are
selected. No Auxiliary functions
are used during basic copying.
❍ For details, refer to the
advanced version of the User
manual on the CD-ROM.
11 Make sure that the number of
copies is set to “1”.
❍ To specify multiple copies, use
the keypad to enter the desired
number of copies. Up to 999
copies can be specified.
12 Press the [Start] key. The copy job
appears in the job display.
❍ Copying is performed in the
order that the job was
programmed.
❍ If other jobs are being printed,
the job will be queued (multi-job
feature).
13 Touch [Job Log].
❍ The printing status of the
programmed job and the job’s
settings can be viewed.
❍ For details, refer to the
advanced version of the User
manual on the CD-ROM.
CF2002.book Page 3 Friday, June 13, 2003 9:29 AM