Pci to cardbus bridges supported – Macsense Connectivity MPC-200 User Manual

Page 40

Text mode
Original mode

line is routed to your CardBus bridge and run the STARTER.EXE with interrupt line

override (STARTER -pi -il NN). If your PCI BIOS is rev 2.1, use ADJIRQ.EXE to route your
selected IRQ to the CardBus bridge.

Developing device drivers and diagnostics for a Digital's CardBus device that is down-

stream of a PCI-to-CardBus bridge (PCB) should be transparent. Once the PCB is config-
ured and the Digital's CardBus device is mapped into I/O or memory space, the driver
should function without knowing that there is a PCI-to-CardBus bridge between it and the
CardBus device that it is driving.

PCI to CardBus bridges Supported

¥ Texas Instruments' TI1130

¥ Toshiba

¥ Cirrus Logic's 6832

¥ Ricoh

¥ DataBook

PCI to CardBus Bridge Utilities