Macsense Connectivity MPC-200 - Manual (Page 21)

7. Click Finish to complete the installation process.
8. Follow the instructions of Windows 98 to restart your computer.
9. After installing the desired drivers and restart Windows 98, the Macsense FastEther
CardBus Card will be enabled, and the LED indicators will be turned on if network is
connected.
Check Card Status
Double-click Macsense Fast Ethernet CardBus Card in the Device Manager of System
Properties. Then Windows will display the Macsense Fast Ethernet CardBus Card
Properties dialog box.
Check information in Device status to make sure your Macsense Fast Ethernet
CardBus Card is working properly.
19
Setup for Windows 98