Macsense Connectivity MPC-200 - Manual (Page 30)

STARTNET.BAT batch file to start netware login
STARTCB.BAT
STARTER.EXE \ __ PCI CardBus bridge utilities
ADJIRQ.EXE
MPB.COM
To change NET.CFG, please refer to NetWare 386 Installation reference for more infor-
mation.
Below is a sample NET.CFG file:
Link Support
Protocol
Bind MCBODI
Link Driver MCBODI
Frame Ethernet_802.2
Protocol IPX E0 Ethernet_802.2
Frame Ethernet_802.3
Protocol IPX 0 Ethernet_802.3
Frame Ethernet_II
Protocol IPX 8137 Ethernet_II
Frame Ethernet_snap
Protocol IPX 8137 Ethernet_snap
;Optional MCBODI driver keywords:
;-------------------------------------------------------------------------------
;TURBO ;Disable PCI post write buffer in IntelPCI
;chipset which gives the PCI bus higher
;priority over the other buses (EISA or ISA).
:
29
Client Driver Installation