Macsense Connectivity MPC-200 - Manual (Page 18)

Double-click Macsense Fast Ethernet CardBus Card in the Device Manager of
System Properties. Then Windows will display the Macsense Fast Ethernet CardBus Card
Properties dialog box.
Check information in Device status. If the information shows This device is not working
properly , please follow the steps described in the next section to upgrade your Macsense
Fast Ethernet CardBus Card drivers.
Upgrade Drivers
As the manufacturer of this Macsense Fast Ethernet CardBus Card, we do know some
notebook computers have problems to drive this card by using the driver that come with
Windows 98. But mostly they could be solved by upgrading this card driver to one supplied
in you driver diskette.
Upgrading Steps
Upgrading steps as following:
1. Start the computer.
2. Insert the Macsense Fast Ethernet CardBus Card into a PC Card slot in your com-
puter. Make sure the card is securely inserted into the socket. Double-click the
System icon from the
Control Panel . Select Device Manager , then double-click
Macsense Fast Ethernet CardBus Card from Network adapters and select
16
Setup for
Chapter 5 Driver Installation for Windows 98