Macsense Connectivity MPC-200 - Manual (Page 10)

Chapter 3 Driver Installation for Windows 95 OSR 2
System Requirements
Windows 95 may come with most of the drivers necessary for accessing your Ethernet
card, but only OSR2 (OEM Service Release #2) and later versions fully support CardBus
adapters. Before the installation, please follow the steps below to check the version of
Windows 95 and CardBus drivers.
Check Version of Windows 95
1. Click the Start button and select Settings .
2. Click Control Panel , and double-click the System icon.
3. Select General . The version will be displayed under the system field. Remember,
only 4.00.950b and later versions (4.00.95c or 4.00.951) fully support CardBus.
Check CardBus Driver's Version
1. Select Device Manger , then click PCMCIA socket , then select one CardBus
controller, and click Properties . The following diagram is an example for a TI PCI-
1130 CardBus controller.
Driver Installation for Windows 95 OSR 2
7