MITSUBISHI ELECTRIC WS-55711 - Manual (Page 60)

60 61
Remote Control Functions: Overview
1. Slide Switch: Select A/V product to be
controlled by the remote control.
2. Numbers: Individually select channels or
enter information into menus.
3. POWER: Turns power on and off for TV and
other A/V products.
4. SQV (SuperQuickView™): Scan through
memorized lists of favorite channels.
5. QV (QuickView™): Switch between the
current channel and last channel viewed.
6. GUIDE: Display program guide for satellite
receiver, some cable boxes, or DVD Disc menu.
Display Digital Channel Guide for Ant-DTV and
other digital devices. Display Track List for AV
Disc.
7. DEVICE: Displays the Device Selection menu
to select the device to view (Ant-A, Ant-B, Ant-
DTV, devices connected to the TV’s inputs, or
IEEE 1394 devices).
8.
CHANNEL: Scroll up or down through
memorized channels.
9.
VOLUME: Change sound level. Volume on-screen
displays are separate for analog devices and digital
devices.
10. MUTE: Turn sound on or off.
11. MENU: Display on-screen menu
system.
12. HOME: Exit TV on-screen menus and return
to TV viewing.
13. ENT: (Enter) Select a channel number or menu
item.
14. ADJUST: Navigate menus, change settings,
and move the PIP on-screen location. Also
operates many NetCommand™ functions. See
the NetCommand™ Guide for details.
15. DEVICE MENU: Display menus for devices
connected to TV. See the NetCommand™ Guide
for details.
16. CANCEL/SUB: Clear SQV and some menu
entries. Add separator between major and minor
Ant-DTV channels.
17. V-CHIP: Turns On or Off the V-Chip Lock.
18. INFO: Display on-screen summary of
the current device used and any broadcast
information available (including current V-Chip
information). See Appendix H for details.
19. AUDIO: Select the audio settings.
20. VIDEO: Select the video settings.
21. PIP CH: Scroll up or down through
memorized channels for PIP or POP.
22. PIP/POP: Cycle through PIP and POP
display choices.
23. EXCH: Exchange PIP or POP and main TV
picture .
24. SLEEP: Set the TV to turn off within 2 hours.
See Sleep Timer for setup instructions.
25. PIP DEVICE: Displays PIP Selection menu
to select the PIP or POP device source.
26. FORMAT: Change the shape and size of the
main TV picture.
27. CONNECT: Initiate IEEE 1394 peer-to-peer
connections.
28. REC: Record with your VCR, setup
recordings for DVCR or IEEE 1394 devices. See
the NetCommand™ Guide for details.
29. PAUSE: Pause your VCR, DVD, AV Disc,
or freeze the PIP or POP image. See the
NetCommand™ Guide for details.
30.REW/REV: Rewind or reverse search with
your VCR, reverse scan with your DVD or AV
Disc. See the NetCommand™ Guide for details.
31. PLAY: Play your VCR, DVD, or AV Disc.
See the NetCommand™ Guide for details.
32. STOP: Stop your VCR, DVD, or AV Disc.
See the NetCommand™ Guide for details.
33. FF/FWD: Fast forward or forward search
with your VCR, fast play with your DVD. See the
NetCommand™ Guide for details.
34. Illuminate: Illuminates buttons or labels on
the Remote Control. Located on the right side of
the Remote Control.
Overview
(Following page, figure 1)