MITSUBISHI ELECTRIC WS-55711 - Manual (Page 34)

34 35
Edit NetCommand™, cont’d.
Name Screen
Figure 1
The Name screen allows you to change the default
name for each device to a custom name of up to
eight characters (including a blank space), selecting
from letters, numbers, and nine different characters.
Use to select each letter, then press ENTER to
move to the next position. Press CANCEL to delete
the current letter and move back one character
position. When in the first position, the CANCEL
button will return the name to the default name.
Fixed Channel Screen
Figure 3
If the device being connected is a cable box and the
“RF” box (on the previous screen) is checked, the
Fixed Channel screen allows you to select the channel
number used for output by your cable box.
Figure 1. Name screen.
Figure 3. Fixed Channel screen.
Figure 2. RF Connection for Cable screen.
RF Connection for Cable Screen
Figure 2
The RF Connection screen displays only when
Adding or Changing a Cable Box. If your Cable Box
is connected to a TV Antenna input, make sure the
RF checkbox is checked. Select which TV antenna
input is used with the Cable Box. If the Cable Box
is also connected to a VCR, select which VCR.
If your Cable box is connected using Audio/Video
cables, make sure the RF checkbox is unchecked.
The Connection screen will follow to allow the
selection of the TV input used with the Cable Box.
The following screens are a part of the Add device or Change device modes.