Milan Technology MIL-S3580 - Manual (Page 9)

9
LED Indicators:
Figure 2-2. LED Indicators
All LED indicators are located on the front left panel of the MIL-S3580. They
provide a real-time indication of system and operational status. The following table
gives descriptions of the LED status and their meanings.
LED Status Description
Green Power is on.
PWR
Off Power is off.
Green The port is operating at the speed of 100Mbps.
100
Off No device attached or port is in 10Mbps mode.
Green The port is connecting with the device.
Blinks The port is receiving or transmitting data. LK/ACT
Off No device attached.
Yellow The port is operating in Full-duplex mode.
Blinks Collision of packets occurs in the port. FD/COL
Off No device attached or port is in half-duplex mode.
Table 2-1. Description of LED Indicators