Milan Technology MIL-S3580 - Manual (Page 58)

58
x Change the Disable Status to Enable.
x
Choose "Submit" button.
Permanent Address Configuration
You can Add, Modify, or Delete Static Unicast Address by selecting entries from the
following screen.
Figure 4-15. Static Unicast Address in Permanent Address Configuration Menu
Enter the MAC address of a system you wish to set as static unicast address the
port associated with the system. Select the status field between Disable,
Forwarding, Filter-In, and Filter-Out.
x Disable – This Unicast Address entry has no effect to the switch system.
x Forwarding – All packets designated to this MAC address will be forwarded
(and only to) the designated port.
x Filter-in – Only packets originated to from this MAC address will be permitted
to enter this port. In other words, packets originated from other MAC
addresses will be dropped at this port automatically.
x Filter-out – All packets designated to this MAC address will be blocked.