Milan Technology MIL-S3580 - Manual (Page 10)

10
Rear Panel
The 3-pronged power plug and ON/OFF switch are located on the rear panel of the
MIL-S3580. The switch works in the range 100-240VAC, 50-60Hz.
Figure 2-3. Rear Panel of the MIL-S3580
Power On
After all network cables are connected, plug the power cord into the power socket
on the back panel and the other end into a power outlet. Turn on the power using
the power switch on the back panel.
Check the front panel power indicator to see if power is properly supplied. The
switch uses a universal power supply that requires no additional adjustment.
Diagnostic Test
After the installation is completed and AC power is applied to the switch, the
system will automatically perform a diagnostic test. The PWR LED will come on.
Within 5 seconds, all LEDs will flash for a split second.
When the switch passes the self-test, the LEDs come on within 15 seconds on
ports that are populated and connected.