Milan Technology MIL-S3580 - Manual (Page 43)

43
configuration changes and completely restart the switch’s hardware including the
power, just as if you had powered the switch off and on. A warm boot is a software
restart; no hardware is affected. Both types of restarts, save the configuration
changes to the switch.
5.2 Factory Reset
Figure 3-38. Factory Reset Menu
This menu lets you to reset a certain portion of the current configuration back to
factory default or all configuration to factory default. If VLAN configuration is reset,
all parameters of the all VLAN configuration is reset and only the one default VLAN
is in effect as it was set from the factory. No other switch configuration is changed.
In order to do a complete system reset, every one of the 6 items in the menu need
to be reset.