Trap filter setup, Device control menu – Milan Technology MIL-S3580 User Manual

Page 21

This menu allows you to enable/disable Web-Based management capability. If

disabled, there is no access to management function through the use of a Web

browser such as Microsoft Internet Explorer or Netscape.

2.6. Trap Filter Setup

Figure 3-14. Trap Filter Setup Menu

The system will generate a set of SNMP traps upon the occurrence of an event. By

checking a filter event, you are turning off the filter and enabling the trap associated

with that event. The trap will be sent to the community name(s) configured in the

Trap Receiver Menu.

3. Device Control Menu

Figure 3-15. Device Control Menu