beautypg.com

Trunk group configuration – Milan Technology MIL-S3580 User Manual

Page 56

background image

56

x Bandwidth Management - Eight levels of speed control facilitate the

management of bandwidth. Configuration of receive and transmit control of

each port is independent. You can set the port to transmit and/or receive at the

provisioned speed or none for full wire speed. Configuration takes effect

immediately after saving, with no resetting of the switch necessary. The

various levels are listed below.

10Mb 312Kb 625KB 938Kb 1.25Mb 2Mb

4Mb 6Mb 8Mb

100Mb 3.12Mb 6.25Mb 9.38Mb 12.5Mb 20Mb 40Mb 60Mb 80Mb

1000Mb 31.2Mb 62.5Mb 93.8Mb 125Mb 200Mb 400Mb 600Mb 800Mb

Table 4-1. Eight Levels of Bandwidth Provisioning

x Default Port VLAN ID - The default VLAN ID must be set for each port after

configuration of new VLANs.

Trunk Group Configuration

Figure 4-13. Trunk Group in Switch Port Configuration Menu

Port trunking is the ability to group several ports to increase the bandwidth between

this switch and another compatible switch. This is an inexpensive way to increase

bandwidth.