Milan Technology MIL-S3580 - Manual (Page 28)

28
Enter the MAC address you wish to set as the static unicast address and the
associated port. Use <Space Bar> to toggle the status field between Disable,
Forwarding, Filter-In, and Filter-Out.
x Disable – This Unicast Address entry has no effect to the switch system.
x Forwarding – All packets designated to this MAC address will be forwarded
(and only to) the designated port.
x Filter-in – Only packets originated from this MAC address will be permitted to
enter this port. Packets originated from other MAC addresses will be dropped
at this port automatically.
x Filter-out – All packets designated to this MAC address will be blocked.
3.3.2. Static Multicast Address Configuration
Figure 3-21. Static Multicast Address Configuration Menu
In the Static Multicast Configuration Menu screen, you can add member(s) to the
group by checking the port(s) with <Space Bar> and key in MAC addresses and
toggle Status field set to Enable.