Milan Technology MIL-S3580 - Manual (Page 19)

19
You can change the serial port setting through this screen to suit you environment,
however, it is recommended to keep the default setting.
2.3. SNMP Community Setup
Figure 3-11. SNMP Community Menu
Use the SNMP communities to restrict access to the switch by SNMP management
stations by adding editing or disabling SNMP communities. You can configure up
to 6 SNMP communities, each with either a restricted read-only or unrestricted
read/write access.
Public Community (Read-only access right) allows the member of community to
view the information but not to make changes to the configuration.
Private Community (Read/Write access right) allows the member of the
community to view and make changes to the configuration.
To set the "Public" and "Private" community names, you can type the desired text
string in the corresponding edit box.