Milan Technology MIL-S3580 - Manual (Page 14)

14
Figure 3-4. Connecting the MIL-S3580 to a Terminal via RS-232 Cable
Login in the Console Interface
When the physical connection between the switch and the PC is established, turn
on the PC and run a terminal emulation program or Hyper Terminal and configure
its communication parameters to match the following default characteristics of
the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: None
Stop Bit: 1
Control flow: None
Figure 3-5. Settings of Communication Parameters