MACKIE SDR96 - Manual (Page 22)

22
SDR 24/96
SDR
24/
96
4. Press the Page Left button when finished, and then select New.
New project created appears in the display to confirm that the project
was successfully created.
Opening a Project
Once two or more projects have been created, you can switch projects easily with
the Open Project command.
To open a Project:
1. Press Project. In the
Project Files Menu, select
Open
.
2. If there is more than one hard
drive, choose the drive you want
to open the Project on by
selecting either Internal or
External
from the Select Drive
screen using the << / >> buttons. The selection defaults to the drive
containing the currently open Project. Select Next.
3. Use the << / >> buttons to scroll
through the Project list, then
select Open.
4. If the selected project has more
than one project file, the Open
button changes to OpenAs. Use
the << / >> buttons to scroll
through the list of project files
that are contained within the project, then press OpenAs. Project opened
appears in the display, and then the name of the project.
Note: The name of the original project appears in the display, regardless
of which version of the project (project file) is open.
Saving a Project
Whenever you record new audio, the audio data and project information is
automatically saved to disk. However, if you make other changes to the project,
such as edits or I/O settings, you must save the project for the changes to be
remembered.
To save a Project:
1. Press Project. In the
Project Files Menu , select
Save .
2. A message appears in the display
asking you to confirm the save.
Select OK or Cancel.
You can save a project under a new name with the Save As command. All the
project information is saved in a new project file, but in the existing project folder.
This allows you to create backup copies as you work on a project, or to create
different versions of the project.
PROJECT
PROJECT FILES MENU >
New Open Save SaveAs
SELECT DRIVE: Internal
<< >> Next
Feel The Love
<< >> Open Cancel
Feel The Love v1
<< >> OpenAs Cancel
PROJECT
PROJECT FILES MENU >
New Open Save SaveAs
Save current project?
OK Cancel