Motorola DSR315 - Manual (Page 63)

Options
DSR315 User Guide 51
Installation Settings
Tune in Satellite Signal. This
option allows you to see the strength
of the signal your antenna is
receiving.
Set Remote Control Address. This
option allows you to control up to
four receivers in a centralized area
with one or more remote controls.
Each receiver requires a separate
address. The default address is 0000.
On the front panel of your receiver press the Menu button to bring up the Menu
screen.
• Choose Options.
• Choose option 6 (Change System Settings).
• Choose option 3 (Installation Settings).
• On the Installation Settings menu, choose option 2 (Set Remote Control
Address). Now follow the instructions on the Remote Control Address screen.
• If you have four receivers, you will have to change the addresses on three of
them: they will have address of 0000, 0001, 0002, and 0003.
To program your remote control for each receiver, hold down the SAT key on the
remote control until the light flashes. Once the light begins to flash enter the
desired address (0000, 0001, 0002, or 0003).
System Status
This is a view-only screen that
displays information about the
status of the receiver.
Trip Counter. Trip Counter
displays the number of message
updates from your service
provider.
Modem Status. Displays a
number of messages that describe
the current modem status.