Connections to audio/video monitor and vcr – Motorola DSR315 User Manual
Page 33
Installation
DSR315 User Guide
21
• Using standard RCA-type audio/video cables, connect the two bottom/left
speaker (R and L) terminals on the back panel of the receiver to the audio input
terminals on the monitor (or TV using the baseband inputs).
Connections to Audio/Video Monitor and VCR
Complete the following steps if you plan to connect the satellite receiver to an
audio/video monitor and VCR:
• Using standard RCA-type audio/video cables, connect the top/right TV
(VIDEO output) terminal on the rear panel of the receiver to the video input
terminal on the VCR.
• Using standard RCA-type audio/video cables, connect the two bottom/right
Speaker Icon (R and L) terminals on the rear panel of the receiver to the audio
input terminals on the VCR.
• Using standard RCA-type audio/video cables, connect the audio and video
inputs on the audio/video monitor (or TV using baseband audio/video inputs)
to the outputs on the VCR.
• If your entertainment center is enabled for Dolby Digital AC-3 Version 5.1 (six
channel) surround sound, connect this port to one end of the orange RCA cable
and the other end of the orange RCA cable to your surround processor.
After you complete the installation procedures, you may wish to use the on-screen
menus to make adjustments to the satellite receiver's operation.