Motorola DSR315 - Manual (Page 15)

Using Your Remote
DSR315 User Guide 3
Exit. To exit any menu and watch a program or to display a program information
if you are already watching a program.
Last Ch. To return to the last channel viewed.
Info. To display detailed information about the current program or a highlighted
program in the Guide. Press it again to turn the information off.
Vol. To raise or lower the volume level.
Mute. To mute the TV sound.
Chan. If you are using a menu, press to change channels without removing the
menu. If you are using the Guide, press to move one page up or down.
Number Keys. These keys operate in different ways, depending upon which
mode you are in:
- While using the menus, press these keys to select a numbered option.
- If you are watching a program, press these keys and ENTER to change
channels. If the channel has three numbers, it will tune in immediately
after you enter the third number. Generally speaking, cable TV channels
(analog) are numbered 1-99, and satellite TV channels are assigned
numbers 100 and above.
VCR Keys. The remote control has separate keys that operate the VCR’s play
( ), stop ( ), pause ( ), fast-forward ( ), rewind ( ), and
record functions. Press and hold the record ( ) button then press play ( )
to perform the record function.
Help. To display the help
screens. Press it again to turn off
the help screens and return to
watching a program. If you
occasionally forget what an icon
(symbol) means or how to use
one of the satellite receiver
features, just press the HELP key
to display the Help messages.
Press the ENTER key to display
each successive Help screen.
Some screens provide explanations that help you to use receiver features.
If you forget what certain keys or icons mean, just look them up by displaying this
screen.
"Remote Energy Saver". If you misplace your remote (i.e., it is stuck in your
couch), and a key is inadvertently pressed, the remote will automatically turn itself
off after three minutes.