Motorola i30sx - Manual (Page 21)

13
SIM Card
In order to receive your programming, you must enable security (see “Enabling
OARSS Security” on page 12). Within 24 hours of enabling security, you will
receive a Net Alert message containing your lists.
To accept your phone programming:
SIM Card
Your phone comes with a built-in level of security protection through the use of
the SIM (Subscriber Identity Module) card. The SIM card stores all your
Phonebook information and your Nextel account identification information.
Since this information is stored on the SIM card, not in your phone itself, you
can remove the information by removing the SIM card.
The SIM card is located in the SIM Card Holder on the back of the phone,
underneath the battery. You can verify the SIM card is in place by removing the
battery and viewing the SIM card through the SIM card holder.
See “Inserting/Removing the SIM Card” on page 19 for information on locating
the SIM card. If there is no SIM card in your phone, notify your Nextel
Authorized Representative.
NOTE: Except for making emergency calls, your phone will not
function without the SIM card.
1 You will receive a Net Alert with the message New Browser Message -
Receive Programming Info.
2 Press C under GOTO.
3 You are prompted to accept changes to your phonebook. Press C
under OK.
4 A confirmation screen displays. Press C under OK.
5 You are prompted again to accept changes to your phonebook. Press
C
under OK.
6 A confirmation screen displays. Press C under OK.
7 Press r to return to the idle screen.