Motorola i1000 - Manual (Page 77)

GETTING STARTED 72 i1000
• For Vehicles Equipped with an Air Bag
CLEANING INSTRUCTIONS
Clean the external surfaces with a damp cloth, using a mild solution
of dishwashing detergent and water. Some household cleaners may
contain chemicals which could seriously damage the unit. Avoid the
use of any petroleum-based solvent cleaners. Also, avoid applying
liquids directly on the portable unit.
FOR FURTHER INFORMATION
For more detailed information on Motorola’s iDEN products, please
see the iDEN web site located at
http://www.mot.com/LMPS/iDEN
Be sure to carry the Pocket Card with you for quick reference.
!
W A R N I N G
!
An air bag inflates with great force. DO NOT
place objects, including communication
equipment, in the area over the air bag or in the
air bag deployment area. If the communication
equipment is improperly installed and the air bag
inflates, this could cause serious injury.
Installation of vehicle communication equipment
should be performed by a professional installer/
technician qualified in the requirements for such
installations. An air bag’s size, shape, and
deployment area can vary by vehicle make,
model, and front compartment configuration (for
example, bench seat vs. bucket seats).
Contact the vehicle manufacturer’s corporate
headquarters, if necessary, for specific air bag
information for the vehicle make, model, and
front compartment configuration involved in your
communication equipment installation.
Safety and General
i1000 Page 72 Wednesday, June 17, 1998 1:53 PM