Motorola i1000 - Manual (Page 65)

GETTING STARTED 60 i1000
TRAVEL CHARGER
The NTN6197A Travel Charger allows a battery to be charged from
an AC outlet. On one end of the travel charger, an accessory
connector attaches to the bottom of the portable unit. At the other
(AC outlet) end of the device is a compact housing containing the
charging circuitry and a plug-in power supply. A lightweight cable
connects the two ends (accessory connector and supply).
A green LED on the accessory connector indicates that the Travel
Charger is plugged in
Installing the Travel Charger
Figure 1: Installing the Travel Charger
1. While holding the i1000 with its front toward you, insert the
accessory connector with the Motorola logo facing you into slot
on the bottom of the i1000 until you hear an audible click.
2. Plug the Travel Charger’s transformer into an AC wall outlet.
The power light (green LED) on the accessory connector will
come on.
Travel Charger Operating Specifications
Input voltage range: 90-264 Vac @ 50/60 Hz.
Operating ambient temperature: 0
°
C to +50
°
C
Transformer
Accessory Connector
Accessories
i1000 Page 60 Wednesday, June 17, 1998 1:53 PM