Motorola i1000 - Manual (Page 32)

GETTING STARTED 27 i1000
PROGRAMMING YOUR OWN PHONE
NUMBER
Programming your phone number means entering it into your
portable. You can enter it now, or wait for your first incoming phone
call, when your carrier’s network automatically enters it for you.
1. To enter the phone number of your portable (or the active line,
if you have two lines), press .
2. Press under “Ok”. The “Enter Number” screen appears.
3. Enter your phone number.
4. Press under “Store”.
SELECTABLE RING STYLES
Your portable has nine selectable ring styles. Portables with two
phone lines can use the same or different ring styles for each phone
line.
To end a call:
Cover Closed Cover Open
¥ Press under ÒEndÓ.
This action terminates the
connection.
¥ Close the cover. This action
ends the connection.
¥ Or, press .
N O T E
If your portable has two phone lines, first set the line
for the phone number that you want to program, and
then continue here. For more information, see
“Setting the Active Line” on page 33.
1
Phone Mode
i1000 Page 27 Wednesday, June 17, 1998 1:53 PM