Motorola ML910 - Manual (Page 136)

8-10 Troubleshooting
z
Make sure the necessary driver(s) is/are correctly installed.
z
Make sure the WLAN feature is turned on.
Transmission quality is poor.
z
Your computer may be in an out-of-range situation. Move your computer closer to the
Access Point or to the WLAN device it is associated with.
z
Check if there is high interference in the general environment and solve the problem
as described next.
Radio interference exists.
z
Move your computer away from the device causing the radio interference such as
microwave oven and large metal objects.
z
Plug your computer into an outlet on a different branch circuit from than used by the
interfering device.
z
If all else fails, consult your dealer or an experienced radio technician for help.
Unable to Connect to Another WLAN device.
z
Make sure the WLAN feature is turned on.
z
Make sure the SSID setting is the same for every WLAN device in the network.
z
Your computer is not recognizing changes. Restart the computer.
z
Make sure the IP address or subnet mask setting is correct.
Unable to Communicate with the Computer in the Network when Infrastructure
Mode is Configured.
z
Make sure the Access Point your computer is associated with is powered on and all
the LEDs are working properly.
z
If the quality of the operating radio channel is poor, change the Access Point and all
the wireless station(s) within the BSSID to another radio channel.
z
Your computer may be in an out-of-range situation. Move your computer closer to the
Access Point it is associated with.
z
Make sure your computer is configured with the same security option (encryption) as
the Access Point.
z
Use the Web Manager/Telnet of the Access Point to check whether Access Point is
connected to the network.
z
Reconfigure and reset the Access Point.
Unable to Access the Network.
z
Make sure the necessary driver(s) is correctly installed.
z
Make sure the network configuration is appropriate.
z
Make sure the user name or password is correct.